Welcome to our Gallery. Our Gallery includes custom and non custom work performed at our store. If you see something you like, help us out and rate it by selecting the appropriate star on the "My Rating" side. Please enjoy your visit.
We have to keep this completely roped off at public events and in our store it has signs all over it. Kids always want to climb on it and people in general can't seem to keep their hands off of it.
Rear view of flush wall built to house amplifiers. 6 - JL Audio 500/1 and 3 JL Audio 300/4. Along with all the batteries and capacitors necessary to for this installation.
This is a picture of the 12 JL Audio 12W3v2. They have been replaced with the 12W3v3 since this picture was taken.
Just about everything has LEDs. All speakers, subwoofer, amplifier, tower speakers, cup holders. Bangin'.
Flush mounted marine JL Audio 6 channel amplifier
Double Din Navigation unit installed.
4 JL Audio 13W1 in custom enclosure
Suede JL Audio logo
DVD fabricated and installed into rear seat console.
The 2013 Mercedes GL550 comes with active headrest restraints which prevents us from being able to remove the headrests. We installed Advent screens with the DVD player built in all mounted within a Seatback with custom matched leather. These screens can either view the same movie or watch something different.
Rear view of cargo area. A JL Audio amplifier mounted on each door and the fiberglass enclosure for the JL Audio 12W7.
The custom built platform to hold 2 10" overhead monitors slightly angled out to each side passenger. This is located just behind the front bucket seats and in front of the second row bucket seats.
Customer wanted boost controls but again everything needed to look factory. There you go.
Of course with all else being done, a new Navigation unit, Pioneer Z would have to be installed. We also installed JL Audio ZR650 component speakers in the front doors and XR650 speakers in the rear doors. Can't see them so no pictures. We also flush mounted a "bullet" camera in the rear door lock so it's not noticeable and doesn't get knocked around. Why not?
The piece of love. This was the best. Crazy angle so it can be seen from the rear, beautiful subwoofer and painted black to match the exterior paint.
Game port installed in rear cargo panel.
Installed pair of Tower Component speakers.
JL Audio Marine subwoofer installed in driver's foot plate.
Fabricated & flocked a "rest" and mount for iPod in center console.
Different view of iPod mount.
Kenwood excelon speaker added to driver's kick panel
Driver's kick panel before adding speaker
JL Audio ported 8" W3 in the trunk.
Trunk before adding the subwoofer
Kenwood Excelon in passenger kick panel
Before adding kick panel speaker
Front remote for audio system made by Fusion
Cover for remote
2006 Chaparral 236
Rear Fusion remote
Remote and cover in the rear
Remote for driver
JL Audio Speakers in the bow
2015 Mercedes Sprinter
Distant view to show back up camera up top above doors
Back up camera with 3rd brake light added
back up camera view in the new radio
Alpine X009-U 9" Navigation receiver customized to fit dash.
2 pair of Wetsounds REV 8s
JL MX650s throughout the boat
2 JL Audio M800/8v2 amplifiers
2015 Axis A22 boat
LEDs everywhere, completely sets it off for night cruises
JL Audio 12" marine Subwoofer
2 pair JL Audio M880ETXv3 tower speakers and enclosures
LEDS rings added everywhere.
LED rings and LED lighting
Wet Sounds Stealth 10 soundbar
LED light bar added to top along with red LED lights added in the grill, underneath and under dash
Great close up of the Apple Car Play app suite on the Pioneer AVH-4000NEX
New Pioneer AVH-4000NEX installed
New Pioneer AVH-4000NEX installed
Back up camera
Without back up camera
Factory radio before installation
factory radio before installation
Shows the new Pioneer AVH-4000NEX installed.
Picture of the factory radio before install.
2004 Mercedes E320
Custom door panel with new JL Audio C2 speaker
Factory door panel
JL Audio XD200/2 amplifier nicely tucked away under the seat
Full view of the boat lit up
All lit up
LED rings added to tower speakers and LEDs added to gunnels
A pair of very mighty JL Audio M880-CCX-SG-WH marine speakers
2 10W7AE-3 JL Audio subwoofers in custom enclosure with "synister" hydro dip trim panel
Added JL Audio M800/8v2 marine amplifier
Added USB/Aux ports
New Clarion marine radio with starboard template to replace factory radio space
Factory radio before radio swap
Pioneer AVH-X4600BT touchscreen radio
Customer box and LEDs for 2 JL Audio 10W7AE-3 subwoofers
JL Audio XD1000/1v2 for 2 10W7AE-3 subwoofers in trunk and JL Audio XD400/4v2 for C3 and C2 speakers
Added underwater LEDs
2 pair of M770-ETX-SG-WH each with LED rings
Close up of tower speaker with LED ring installed
Close up of tower speaker without LED ring installed
Back up camera image on the new radio
Compare this huge 9" Alpine Restyle radio designed specifically for this Jeep
2 JL Audio 12W3v3 subwoofers
The great audio upgrade package from JL Audio. 2 JL Audio stealthboxes, one on each side, each with a 10TW1, 2 pairs of C5 speakers and a great amplifier as well with the XD1000/5v2.
New Kenwood Excelon receiver installed
Close up of one of the JL Audio stealthboxes
Zack got a lot installed..and it sounds great
See the back up camera mounted in the spare tire?
Custom built fiberglass kick panels for additional 6.5" speakers.
JL Audio MHD900/5 amplifier...all you need
Added USB and Aux port to "glove box" on passenger side
Factory radio was larger than our Clarion marine receiver. This is pretty common. This is an after shot of our starboard template for holding a smaller radio.
New Clarion wired remote installed
Close up of new Clarion marine remote
2 pair of KingPin Tower Speaker cans with JL Audio MX650 marine speakers
close up of 2 pair of KingPin Tower Speaker cans with JL speakers
Full trunk view with custom subwoofer enclosure
Close up of subwoofer enclosure
Custom center console...all about that shifter
front of custom center console, added accessory switches
Kenwood Excelon DNX691HD added to center console
JL Audio MX650 speakers up front
JL Audio MX650 speakers in rear
JL Audio marine subwoofer
JL Audio M600/6 marine ampli
Fusion radio in "glove box"
Fusion radio controller by driver
Bill is a returning several times over kind of customer. As a gift we installed the LED lights in the gunnels for a little effect while on Kerr Lake at night.
View of new JL Audio 8W1 subwoofer installed in factory subwoofer location. We had to trim out the space to fit the JL sub. Looks good right? We also installed a 3 way component set of speakers, JL Audio C5-653 to be exact. This is one of the best sounding systems we have ever had the pleasure to do.
Close up of Subwoofer in console.
A few of our favorite things.
JL Audio HD900/5 amplifier installed in front trunk.
There is no dash kit or wiring harness made for this vehicle. That does not always stop an experienced car audio shop. Beautiful, clean.
View of speakers and radio installed in the dash.
2 pair JL Audio Marine component speakers
Kenwood marine radio
Close up of 4 sensors flush installed and painted to match.
This was originally a JL Audio stealthbox with a 13" W6. Didn't sound quite right so Chris re-shaped the box, added a high gloss trim with a 13" W7. Aww..so good.
13W7 in the stealthbox located in the trunk.
Rear deck panel built to house speakers and amplifier.
Front kick panels built and covered in vinyl for JL Audio C2-650x speakers
This is a full view of the rear deck built for the speakers without the factory trim so you can see the full thing.
Rear deck again with better view of the amplifier.
Flush mounted JL Audio HD900/5 amplifier in front trunk.
Fiberglass enclosure between bucket seats housing 2 JL Audio 8W3v3 subwoofers. Also installed a pair of JL Audio ZR650-CSi in the doors. This was a top notch job.
Pioneer AVIC unit installed in the dash.
This mustang came with it's own upgraded system but Greg knew we had better. We installed a pair of JL Audio C5-570 component speakers, JL Audio VR525-cxi, pair of JL Audio ZR800-CW woofers in the doors (as seen in this picture), JL Audio HD600/4 amp and a JL Audio 500/1 amp.
Added a touch of vinyl to the box for a sharper look and installed a JL Audio 12W3.
JL Audio stealthbox built for the Challenger located in the truck. Also view includes the amp rack built hidden under trunk flooring.
Amp rack built to house the JL Audio HD900/5 and cleansweep components.
Flush mounted tweeters in doors.
Moved the air controls down under the dash. We needed to fit both a double din radio and Zappo equalizer to where the radio/air controls were factory.
Built a false floor to flush the hugongous Hifonics amplifiers in. Custom built ported box for 2 18" Soundstream subwoofers with front trim panel designed to give a flush, custom fit to the front of the box.
Top of custom built box.
Top and backside view(behind seats) of subwoofer enclosure. This flush mounted the 3 4channel Zappo amplifiers for the multitude of speakers located in the customized door panels.
This is why the air controls were moved below the dash. Double din radio and Zappo equalizer custom fitted in the dash.
Built custom center console for 2nd row bucket seats to house the game station.
Rear passenger doors with speakers and woofer.
Front door panels with 5 component sets of speakers.
Custom welded battery cage to mount underneath the Yukon; because where else would it fit?
Custom built box for JL Audio 12W6 subwoofer. This is view of it facing rear of vehicle before convertible top finishes opening.
View from trunk of subwoofer and JL Audio 500/1 amplifier
Fabricated box rear view.
Wood grain trim panel installed with grill cloth between trunk and cabin of vehicle with rear seats folded down. This port will allow the subwoofer to reach the passengers.
Rear seat in it's place to show port in normal view.
We've done quite a few things for Matt over the years but before a kit was made for his particular vehicle for this exact thing we made one for him.
Factory pillar before install.
Attaching the fabricated pod to factory pillar.
One pillar done, one factory.
Hidden touchscreen radio. They don't make them like this anymore.
Hidden JL Audio subwoofer and amplifier.
Mounted amp in front trunk.
JL Audio 13TW5 subwoofer
View of fiberglass enclosure in spare tire well in back of Kia Sportage. This sounded awesome!
Rear, ceiling mounted speakers.
Customer wanted subwoofers but the Dakota doesn't offer much space. We came up with the idea to build him a rear center console to house 2 JL Audio 8W3 subwoofers. This sounded SO good.
View from the front seats.
Idea of the double din unit installed in the dash before the fabrication.
New double din unit on top of factory radio. The factory radio is a din and a half and not double din. So a double din kit wasn't available although the space was.
Passenger side kick panel fiberglass enclosure for a JL Audio 12W3 subwoofer. These always sound so good.
Passenger seat with JL Audio marine speaker and subwoofer installed.
JL Audio Marine tower speakers.
James wanted screens everywhere...starting with the visors.
To make the visors even more special, we recovered them in suede.
Full rear view shot of the enclosure. Includes 4 JL Audio 13W3v3 subwoofers. 1 motorized amp rack holding 2 JL Audio 500/1 and 1 300/4 amplifiers. 1 15" monitor for video. The fiberglass enclosure and the amp rack were all painted to match the customer's exterior paint.
Another rear shot showing all video components. 2 visors, 2 overhead monitors, 4 headrest monitors and 1 enclosure monitor.
View of JL Audio amplifier mounted and fiberglass enclosure with a JL Audio 12W3 subwoofer.
This is the factory pocket cover we used to flush mount the satellite radio.
Press and release the cover and you see the satellite radio.
View of the install and mount created without the satellite radio in place.
Under seat amp rack
Top view of amp rack trimmed with wood grain to match the customer's dash.
Rear of GMC Envoy. Motorized work station with logo. Each side had a window view of a rotating pedestal to showcase product. 24" LCD monitor in the middle with speakers for sound.
Rear wall with flushed amplifiers, logos and lights. Second time around.
Custom box with 2 JL Audio 12W1 subwoofers.
Amp mounted beneath flooring in hatch.
15" Overhead DVD/monitor.
Customer wanted a gameport and power supply installed. We found the back of this console to be the perfect place. You'd never know it wasn't factory.
No dash kit was made for this car to install a double din head unit.
2 JL Audio 13W3 subwoofers.
Not only did we have to fabricated the space to fit a double din head unit but we also had to move the AC controls and ductwork.
Trunk enclosure customized to show off 2 JL Audio 12W1 subwoofers and 2 JL Audio amps in the floor.
Enclosure for subwoofers had hidden neons installed.
Amp rack installed under 2nd row. JL Audio 500/1 and 300/4.
View of the subwoofer enclosure. Customer, sweet Travis, wanted great sounding bass but didn't want to give up his third row. What to do? This was built before the release of JL's thinline subwoofers so we installed 2 12W3v3 subwoofers and due to space had to build a box formed to his rear hatch and seat. We built a panel and painted it to match the interior which holds our logo and hides the neons.
Custom built and trimmed enclosure, ported for 2 JL Audio 12W7 subwoofers. Amp rack built to step out 2 JL Audio 500/1 amps and 1 JL Audio 300/4 amp. Side panel with JL logo hides LEDs for a cool glow.
View of our logo on side panel.
As seen here, very little room is taken up in the trunk but the customer is able to fit a hefty 10" W6.
View of rear hatch with custom built amp rack to flush the amplifier, crossovers and stealthbox.. JL Audio 500/5 amplifier and 2 pair of JL Audio ZR650 speakers.
Top of the picture is the stealthbox. Can hardly tell it's there.
Flush trim amp rack on front of box. 2 JL Audio E1400 amps and 1 JL Audio E4300 amp.
First time around.
Rear wall built to house and frame amplifiers.
Driver's view of the wall. Ported enclosure trimmed with black suede frame for 4 Orion subwoofers. All in all, this was around 5000 watts RMS.
Center console fabrication with DVD, 15" monitor, equalizer and CD player.
Front driver's door with fiberglass speaker pod housing the 3 mid drivers for the 3 pairs of XR650. Top right corner of the picture shows the matching tweeters.
To show to scale how much was hidden for the boost controls.
Fiberglass enclosure with JL Audio 12W6 subwoofer.
Built panels to house 3 Jl Audio 8W3 subwoofers. He started with 2 and loved it so much he wanted 2 more.
The finished rear end of the center console. Can't have too many cup holders and the customer was able to keep his rear air controls.
Can't just have the amps mounted, you have to let them glow.
Customer wanted overhead monitors installed in the ceiling but the rear air controls were in the way and the customer did not want to lose them. We decided to fabricate a cupholder with the air controls and mount that on the back of his center console. This is the beginning of it.
Can you say GUTTED? We removed EVERYTHING, all seats, headliner, carpet, panels, everything to install, no cover every inch of this vehicle in dynamat. He didn't want to hear the diesel engine only great sounding audio.
Subwoofer enclosure trimmed with wood grain to match the customer's dash.
Close up of the subwoofer enclosure and our logo.
Boost module lit up.
Component pair of JL Audio marine 7.7" speakers, and a 7" LCD monitor for "why nots"
Hidden Bluetooth module.
At the time there was no kit made to fit an aftermarket radio; so we made it ourselves.